Starting with 2010 SP3.0, SolidWorks is checking whether you are on subscription before you install the service pack.  With SP3.0 you will just get a warning if you are not on subscription but starting with SP4.0 you will not be able to install. 

For network licenses, the expiration date is saved on the license server and that is the date that is checked during installation.  Depending on the date the SNL Manager was activated and the subscription expiration date, you may get the message that your subscription has expired even though it has been renewed.

SolidWorks has issued a critical alert for 64-bit systems that are running 2009 SP5, 2010 SP1, and 2010 SP2. It is a bug in the PhotoWorks program and it is recommended to not use it until the hotfix has been applied to your system. The hotfixes are available for download and a service pack will be available shortly. The downloads for the above mentioned service packs have been removed from the SolidWorks web site and will be replaced by 2009 SP5.1 and 2010 SP2.1 when they become available.

SolidWorks 2009 SP5 (x64), SolidWorks 2010 SP1 (x64), and SolidWorks 2010 SP2 (x64) have been temporarily removed from the SolidWorks Downloads pages due to the technical issue listed below.

An issue with PhotoWorks has been identified in 64-bit versions of SolidWorks 2009 SP5, SolidWorks 2010 SP1, and SolidWorks 2010 SP2 in which the SolidWorks installation, the operating system, program files and data files may become damaged or unrecoverable if the PhotoWorks add-in is enabled when SolidWorks is running and the SolidWorks process is already using more than 2GB of virtual memory.  These service packs have been removed from the web site as a precaution in order to prevent the risk of damage to customers’ systems under these circumstances.

This problem does not affect 32-bit versions of SolidWorks; hence all 32-bit Service Packs are still available for download. Furthermore, SolidWorks 2010 SP0 (x64) is not affected, nor are SolidWorks 2009 SP4.1 (x64) and earlier Service Packs of 2009. Please note also that this issue only pertains to enabling the PhotoWorks add-in and has no effect on the use of PhotoView 360 for renderings.

All customers with PhotoWorks on a 64-bit operating system with SolidWorks 2009 SP5, 2010 SP1, or 2010 SP2 MUST apply this hotfix.

Hotfix instructions:

 Select the version to hotfix from the links below. (Note: SolidWorks cannot be running when the hotfix is applied):

- SolidWorks 2009 SP5

- SolidWorks 2010 SP1

- SolidWorks 2010 SP2

There is a problem in 2010 for automatic updates for administrative images. SW 2010 SP0 installation does not update automatically after upgrading Admin Image. This issue only affects Installation Manager-based administrative images; no other images are affected by this. The problem is due to the swspamanger.exe installed with SolidWorks on client machines failing to check and install the latest Installation Manger/Administrative Image.

The workaround for updating client machines is to deploy the service pack similar to deploying a new administrative image (i.e. ask users to browse to the \StartSWInstall.hta). NOTE: The person responsible for deploying SolidWorks, often a system administrator, should not send the .HTA file via email as the paths will not be recognized; instead the system administrator should send a shortcut/link to the .HTA file so it runs directly from the administrative image folder.

The issue will be resolved in SolidWorks 2010 SP2. Please note the fix will not be implemented until SP2 is installed (i.e. the automatic update won’t work until going from SP2 to SP3). To upgrade to SolidWorks 2010 SP2, the same method described above must be used.

There is also an issue when trying to update an install as per the work around when there is an admin image install of 2009. The only way to get this to work is to remove the 2009 install.

These two issues are covered under SPR 530079 for the auto update and SPR 530818 for the 2009 image install. They are both slated to be fixed in 2010 SP2.

Recently, we’ve had several customers recognize a slight quirk in SolidWorks 2009 SP5 and SolidWorks 2010 SP1.   There was a change made to how the Edit Referenced File location dialog box works, but the directions on how this tool now functions were not included. 

To open a file with a new reference you can go to File>Open, and hit the References… button in the Open dialog.  In previous releases users could double-click the filename in the table to browse to a new file to reference.  In these 2 specific versions, you now have to hold the Ctrl key down while double-clicking – but careful!  You must double-click within the cell, but not actually on the text within the cell.  Since this new behavior is not exactly intuitive, and any indication that the functionality had changed was omitted, a hot fix has been released to restore the previous behavior.

The hot fix is attached to Solution S-045011 on the SolidWorks Knowledge Base (accessible through the Customer Portal).  Or contact us here at (763) 560-8600 option 4 or support@symsolutions.com and we can provide it for you.

New for SolidWorks 2010, SolidNetWork License (SNL) server Activation will be implemented as the standard licensing methodology for global commercial network customers with the SolidWorks 2010 release.

SNL Activation is a natural extension of Standalone License Activation. Activation will completely eliminate the need for network USB dongles, which will greatly streamline the business process, reduce cost, shorten the delivery cycle, and reduce the technical issues caused by the dongle licensing.

For major releases of SolidWorks, upgrading the license manager consists of uninstalling the old license manager, installing a new one, and re-activating the SolidNetWork license.

The license manager for a newer release can distribute licenses for client computers remaining at the previous release as well.

1. Start the SolidNetWork License Manager to verify that no client computers on the network are running SolidWorks.  The License Usage tab shows clients running SolidWorks.

2. Uninstall the old license manager.

3. Install the new license manager and re-activate the SolidNetWork license on the license manager computer. If you are upgrading the SolidNetWork License Manager on a computer that also runs the SolidWorks application, upgrade SolidNetWork license managers and clients before installing any new SolidWorks application service packs on that computer.  If you are upgrading the license manager on a computer that hosts administrative images, upgrade the license manager before upgrading the administrative images.

Uninstalling the SolidNetWork License Manager

When upgrading the SolidNetWork License Manager, you must uninstall the old license manager before installing the new one.

1. Start the SolidNetWork License Manager.

2. Verify that no client computers on the network are running SolidWorks. The License Usage tab shows clients running SolidWorks.

3. On the Server Administration tab, under License Server, click Stop.

4. Click OK to exit the license manager.

5. In Windows, open Control Panel > Add or Remove Programs.

6. Select SolidWorks SolidNetWork License Manager, click Remove, and confirm the deletion.

7. In Windows Explorer, delete the SolidWorks SolidNetWork License Manager folder. (Typically, this folder is located under Program Files in the SolidWorks installation directory.)

You now are ready to install a new version of the license manager.

 Installing and Activating a License Manager

The SolidNetWork License Manager supports multiple license clients. It distributes licenses to clients on the network.

1. Start SolidWorks Installation Manager

a) For type of installation, select the following:

• Administrative Image and Server products

• Install SolidNetWork License Manager (distributed licensing) on this computer

b) For serial number, provide the SolidNetWork License serial number.

c) Follow the online instructions to complete the installation in SolidWorks Installation Manager.

2. To activate SolidNetWork licensing, start the SolidNetWork License Manager.

a) When prompted to activate, click Yes.

b) On the SolidNetWork License Server Information screen:

• If your company uses a firewall, select A firewall is in use on this server.

• Use the default value for Port Number (and for Vendor Daemon Port Number if you have a firewall) or specify the port numbers your company uses. The port number is a TCP/IP port number in the 1024-60000 range, used exclusively by this process. Normally, the default (25734) is suitable and is unlikely to be the same as any other FLEXnet server process currently on the license manager computer.

c) On the Activate Your SolidWorks Product screen:

• Select the Internet or email procedure.

• Supply email contact information.

• Click Next to proceed.

• Internet: Activation occurs automatically. (Recommended)

• Email: Press Save to create a request file, then send the file to activation@solidworks.com. When you receive the email containing the response file, extract the file from email and then click Open to load it. If necessary, you can exit and rerun the activation procedure to open the response file.

3. Click Finish

You no longer need your dongle.  Please send it back to us.

Symmetry Solutions Inc
http://www.symsolutions.com
6860 Shingle Creek Parkway #120
Brooklyn Center, MN 55430